This page is designed for order packing.
Before start
Please prepare your packing workstation.
Step 1:
Create and print a barcode label with "assembly" type. Go to "Menu->Settings->Storage locations barcodes-> type Assembly".
Pic.1 Storage location with a type "assembly".
This barcode you will use to start work on the Packing workstation in Orderadmin. Stick the label on a packing table where you are going to pack orders.
Step 2:
Create a "Packing queue" - the queue which contains certain orders for packing (go to "Workstations -> Management -> Packing).
Pic.2. Route to create the packing queue.
Think off the name of the queue that will be easy recognise.
Pic2.2. Create new queue.
Step 3:
Prepare a desktop, barcode scanner and label printer. Prepare packing supplies.
Step 4:
Set up your printer.
Label printer often connects automatically. But if it didn't happen use the Printer settings.
This button indicates printer status. Tap on this button and you will get the modal window with the printer settings. Try to connect your printer with the "Try to reconnect" button.
Printer settings details
Pic.3. Printer settings
Force show a printing modal means
Auto-close print window means
Time out before close means
Start Packing
Step 1:
To start work just scan barcode your assembly location.
Pic.4. Message: Please scan the barcode of your assembly location to start work.
Or enter your barcode manually add * at the end of the barcode number without space.
Pic.5. The barcode field.
Pic.6 The ID of the packing workstation appears Instead of the message after the barcode is scanned.
This button allows scan barcodes with a photo camera. Just tap on it and direct on a barcode, if needed push the button on your device to take a photo.
The "Reset" button restarts the "Packing workstation". Use it if you want to change the "Assembly" location.
Step 2:
Choose the queue.
Pic.6. Packing queue created in advance in Menu->Workstations-> Packing.
Pic.7. Button bar.
If you choose the wrong queue please use the "All queue" button. It will lead you to the list of queues to choose another one.
Step 3:
Orderadmin will show you the address of the distribution bin with the ready-to-pack items for the order.
Take the item that showed on the desktop screen, scan its barcode, and put it in the box. Then the system will show you all other items of the order.
Pic.8. The bin address and the items of an order for packing.
Step 4:
When the order is ready you will get the label from the printer. This label you will use during the measuring of the parcel to receive the shipping label.
Stick the label on the box and scan this label to finish the packing process. If the label isn't printed, you can try print by clicking the "Print" button.
When all orders are assembled the system will give you the message that assembling is finished.
Pic.9. Please scan the barcode of the packing label.
Reprint
By the "Packed" button you can see all packed orders and the exact time. Also, you can reprint the label if needed.
Pic.10. The queue with the packed order.